Which tensile tester fits your specimen?
Select a starting configuration below. Send the specimen dimensions and test method so we can confirm the fixture and usable force range.
| Specimen or condition | Suggested machine | Fixture to discuss | What to send |
|---|---|---|---|
| Strip, film or a small component | WH-70 single-column tester | Grip face to suit the material | Width, thickness, initial grip separation and expected peak force |
| Small workpiece for benchtop testing | WH-8283 benchtop tester | Holding fixture matched to the part | Drawing, gripping point, load direction and readout needs |
| Wire with a crimped terminal | Wire crimp pull tester | Terminal holder and opposing wire grip | Terminal dimensions, conductor size (mm² or AWG), force and method revision |
| Wide specimen or bulky grips | Dual-column machine | Grips that fit the frame opening | Specimen width, usable travel and load with units |
| Specimen tested at a specified temperature | Temperature-controlled tester | Grips and extensions suitable for the chamber | Specimen temperature, soak time, required force and clearances |
A tensile testing machine records the force applied as a specimen is pulled. The frame, load cell and grips depend on the sample and on how your method measures extension.

Dual-column tensile testing machine
Pull prepared material specimens between opposing grips. Select the load cell and gripping arrangement around the shape of…
Choosing a tensile frame
Start with the shape and dimensions of the specimen. A flat coupon and a crimped wire terminal require different ways of holding the sample. Share the expected force and unit, the test method and any temperature requirement.
Compare instrument configurations or discuss your specimen with an engineer.
WH-70 single-column tensile testing machine
For material coupons and narrow specimens, start with the expected peak force, specimen width and thickness, grip faces and required travel. Tell us if your method requires strain measured directly on the specimen. We can review the load cell, grips, controller and extensometer around those requirements.



WH-8283 benchtop tensile tester
Share the specimen dimensions, expected force, test speed and reporting requirements so we can confirm a compatible benchtop configuration. For crimped terminals, send the wire size in mm² or AWG and a front and side view of the assembly.

